Roller Press Introduction

     Roller press is my company in introducing and absorbing Germany roller press, on the basis of advanced technology, combined with the advantages of Humboldt and "dove roller press, to research and development of the most reliable solid material grinding equipment suitable for compressive strength less than 300Mpa, humidity less than 30% of the fine and secondary crushing hard materials operations, be widely used in cement, mining, metallurgy, ceramics and other industries.
    Roller press machine is configured with two solid grinding rolls, roller surface adopt welding and hard alloy casting roller surface, for feed size less than 40mm and the discharge size 4-15mm medium and fine crushing operations. Such as the pre-crushing mill cement industry cement clinker, limestone and composites; former iron ore into the mill pre-crushing industry slag, iron ore, silicon ore; brick factory crushing all kinds of ores and other unburned do; or similar to the above broken occasions.

Working Principle

    Roller press machine depending on the two opposite rotating solid grinding roller relatively high-speed rotation, the use of inertia dynamics to produce high extrusion pressure (typically pressure to 150MPa), the material through the feeding device into the gap between the two rollers (V crusher chamber) after being squeezed and cut the material change mechanism, completely destroyed the internal crystal structure of the material, so as to achieve cake and powder, finally falling from the gap between the rolls ,then being exhausted from the discharge port.

Technical Parameters

Note: Due to continuous technological improvement equipment, the above data for reference only, actual data to CAD drawings electronic version shall prevail.