Jaw crusher Introduction
Jaw crusher is suitable for crushing hard material (compression strength less than 250Mpa). For example: coarse and fine crushing operation of iron ore, slag, phosphorus ore, copper ore, silicon ore, limestone, quartz stone, ceramic and solid materials with similar hardness. It can also breaking bulk materials of concentrator, stones factory, cement plant. Features: low use and maintenance costs,high ratio of reduction, high reliability, small power consumption. It is widely used in mining, building stones factory, building materials, metallurgy, ceramics and other industries.
Working Principle
The motor drives the belt wheel, and makes the movable jaw plate move up and down with the help of eccentric shaft. When the movable jaw rises, the angle between the fixed jaw plate and movable jaw plate gets larger, and the materials can be crushed to reach the crushing target. When the movable jaw plate down, the angle between the two jaw plate gets smaller. The movable jaw plate leaves the fixed jaw plate under the function of drawbar and spring, and then the crushed materials are discharged from the lower outlet of the crushing cavity.
Technical Parameter
Note: Due to continuous technological improvement equipment, the above data for reference only, actual data to CAD drawings electronic version shall prevail.
Address:No. 368, Quyang Road, Dongcheng Development Zone, Linqu, Weifang, Shandong, China(Mainland)
Telephone:0086-536-3390688
|